Table of Contents
Advertisement
Menu Operation
the camera is change to iris control mode automatically for
the camera exposure. Anti-flicker mode is not supported in
the ALC2 mode. If you want to use it, select ALC mode .
SENS-UP setting
If pictures are not clear due to darkness, this SENS-UP
operation would increase the sensitivity of picture.
Use [UP] or [DOWN] button to select [SENS-UP]
1.
option.
Use [LEFT] or [RIGHT] button to select mode.
2.
•
AUTO: Adjust the sensitivity of the picture
automatically.
>
SENS-UP LIMIT: Use [LEFT] or [RIGHT]
button to set the SENS-UP limit.
>
EXIT: Select a mode and press [SET] to exit
the menu.
•
OFF: Not used.
Note:
If you set to one of the SHUTTER options except AUTO on
the [SHUTTER] menu the [SENS-UP] setting is not available
and [---] mark is displayed.
White Balance settings
Select the method by which the camera shifts its output
colors to compensate for the color of a light source.
1.
Select [WHITE BAL] option.
29
Advertisement
Table of Contents
