Table of Contents
Advertisement
COPIER
A269I351.WMF
1. Set the developer cover [A] as shown in the figure and place the development
unit on it.
2. Pour 1 bag (700 g) of developer in the developer assembly.
3. Turn the sleeve in the forward direction several rotations to give it a smooth
layer of developer.
4. Replace the developer cover (2 screws).
5. Open the toner supply unit shutter [B] and set the developer assembly in the
revolver/drum drawer (2 lock screws and 1 sensor connector).
[A]
3-12
30 March, 1999
[B]
A269I359.WMF
Advertisement
Table of Contents
