Initial Setup - Honeywell Wi-Fi Thermostat 9000 Installation Manual

Initial Setup

Upon initial power up, or after being reset to factory defaults, the initial thermostat options
(language, location, and system type) must be set to define the heating/cooling system.
Other options can be customised later.
Follow prompts on the screen to select appropriate options.
1. Select the language of your choice, then
touch Next.
Touch Next, or name the thermostat
location - touch THERMOSTAT
the instructions.
33-00235
Next
2. Select Home or Business installation,
then touch Next.
Next
3. Select what the thermostat will control
and touch Next.
and follow
Note: Touch the orange Help button on the
screen for more information.
4. Select the system type and touch Next.
(The system type determines other
selections for completing the initial setup.)
5. Touch
each screen.
6. Touch
thermostat displays an option to connect
to the Wi-Fi network.
Next
6
Next
after making selections on
Done
on the last screen. The
Next
Next