Honeywell Wi-Fi Thermostat 9000 Installation Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Thermostat
  5. Wi-Fi Thermostat 9000
  6. Installation manual

Honeywell Wi-Fi Thermostat 9000 Installation Manual

Colour touchscreen
Hide thumbs

Advertisement

Table of Contents

Wi-Fi Thermostat 9000
Colour Touchscreen
Installation Guide
HOME: Touch to display Home screen.
FAN: Select fan mode.
SYSTEM: Select system mode (heat/cool).
MENU: Touch to display options. Start
here to set a program schedule.
CURRENT SCHEDULE: Change temperature
setting and select temporary or permanent hold.
INDOOR CONDITIONS: Shows indoor
temperature and humidity.
CURRENT DATE AND TIME.
CURRENT STATUS: Shows system
mode (heat/cool).
OUTDOOR CONDITIONS: Shows outdoor
temperature and humidity (post registration).

Advertisement

Table of Contents
loading

Related Manuals for Honeywell Wi-Fi Thermostat 9000

Summary of Contents for Honeywell Wi-Fi Thermostat 9000

  • Page 1 Wi-Fi Thermostat 9000 Colour Touchscreen Installation Guide HOME: Touch to display Home screen. FAN: Select fan mode. SYSTEM: Select system mode (heat/cool). MENU: Touch to display options. Start here to set a program schedule. CURRENT SCHEDULE: Change temperature setting and select temporary or permanent hold.

  • Page 2: Wallplate Installation

    Wallplate Installation 1. Separate wallplate from thermostat. 2. Mount wallplate as shown below. Back of Thermostat Wallplate Drill 3/16" holes for drywall. Drill 7/32" holes for plaster. Mounting screws Wire hole Wall anchors Wallplate CAUTION: ELECTRICAL HAZARD Can cause electric shock or equipment damage. Disconnect power supply before beginning installation.

  • Page 3: Terminal Designations

    Wiring Terminal holes accept one wire Terminal release Remove jumper loop ONLY if you have both R and RC wires. Terminal Designations Common wire from secondary side of cooling transformer (in case of two transformers) Optional wire save module. Cooling power. Connect to secondary side of cooling system transformer. Heating power.

  • Page 4: Wiring Conventional Systems

    Wiring Wiring Guide — Conventional Systems Wiring Instructions 1. This thermostat requires a 24VAC common wire to power-up. The K terminal is available for Wiresaver module (THP9045A1023). 2. Straighten the wire. Using a pen’s tip, hold down the terminal and gently slide the wire into the terminal hole.

  • Page 5: Wiring Heat Pump Systems

    Wiring Wiring Guide — Heat Pump Systems Wiring Instructions 1. This thermostat requires a 24VAC common wire to power-up. The K terminal is available for Wiresaver module (THP9045A1023). 2. Straighten the wire. Using a pen’s tip, hold down the terminal and gently slide the wire into the terminal hole.

  • Page 6: Initial Setup

    Initial Setup Upon initial power up, or after being reset to factory defaults, the initial thermostat options (language, location, and system type) must be set to define the heating/cooling system. Other options can be customised later. Follow prompts on the screen to select appropriate options. Next Next 1.

  • Page 7: System Setup

    System Setup On the home screen, touch Menu > System Setup to modify the initial system setup. MENU System Setup Next System Setup Options (MENU > System Setup) Screen Title Settings and Options Language English/Français/Español. Thermostat installed in Home/Business (Thermostat is used in a residential (default) or commercial setting). Touch THERMOSTAT button to display the screen where you can enter a custom...

  • Page 8: Connecting To The Wi-Fi Network

    Connecting to the Wi-Fi Network After the initial setup, walk the homeowner through connecting to a Wi-Fi network. Or, refer the homeowner to the User’s Guide, so that the homeowner can connect the thermostat to the Wi-Fi network later. 1. Connect the Wi-Fi network. Touch to connect the thermostat to the Wi-Fi network.

  • Page 9: Setting Advanced Preferences

    Setting Advanced Preferences 1. Touch MENU. The thermostat displays a MENU list of options. 2. Select Preferences > Advanced Preferences Preferences. The thermostat displays the first screen of options that you can change. 3. On each screen, make changes as Next needed, then touch to display new...

  • Page 10: Troubleshooting

    Troubleshooting If you are facing difficulties with your thermostat, please try the following suggestions. Most problems can be corrected easily through these. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating and cooling system is on. •...

  • Page 11: Accessories And Replacement Parts

    Accessories & Replacement Parts Please contact your distributor to order replacement parts. Cover plate assembly Part Number THP2400A1027W Specifications Temperature Ranges Electrical Ratings • Heat: 40° to 90°F (4.5° to 32°C) Terminal Voltage Max. Current • Cool: 50° to 99°F (10° to 37°C) (50/60Hz) Rating Operating Ambient Temperature...

  • Page 12: Need Help

    Recycling Corporation at www.thermostat-recycle.org for information on how and where to properly and safely dispose off your old thermostat. Need Help? For assistance with this product please visit http://customer.honeywell.com or call Honeywell Customer Care toll-free at 1300 363 936 For more information http://customer.honeywell.com *33-00236-02* Automation and Control Systems Honeywell E&ES...

Table of Contents