Setting Advanced Preferences - Honeywell Wi-Fi Thermostat 9000 Installation Manual

Setting Advanced Preferences

1. Touch MENU. The thermostat displays a
list of options.
2. Select Preferences
Preferences. The thermostat displays the
first screen of options that you can change.
3. On each screen, make changes as
needed, then touch
options. Repeat this step until you have
made all changes.
4. After making all necessary changes,
Done
touch to save and exit.
Screen Title
Scheduling Options
Temperature Indication Scale
Heating and Cooling System
Changeover
Number of Schedule Periods
Pre-occupancy Purge Duration *
Type of Override *
Override Duration *
Early Recovery for Heating *
Early Recovery for Cooling *
Temperature Limits
Keypad Lockout
Clock Format
Daylight Saving Time
Indoor Display Offsets
*Available when thermostat is installed in Business mode.
> Advanced
Next
to display new
Settings and Options
Select Non-programmable or Programmable. Programmable uses default or
customised programming to automatically raise and lower temperature settings for
different times of the day.
Select Fahrenheit or Celsius.
Select Manual or Automatic.
Select 2 Periods Per Day or 4 Periods Per Day.
Select how long the fan will run before each occupied period: Off, 1, 2, or 3 hours.
Select Standard to maintain the programmed periods or Initiate Occupancy to use
energy-saving settings until a user presses Start Occupancy.
Select how long to maintain temperature during an override: 1-10 hours or No Limit.
Select No to begin recovery on schedule or Yes to ramp up temperature early.
Select No to begin recovery on schedule or Yes to ramp down temperature early.
Select the Minimum Cool and Maximum Heat Limit.
Select Unlocked/Partially Locked/Locked.
Select 12 Hour or 24 Hours.
Select Off or On. If set to On, the system will automatically change time/date to account
for daylight saving.
Select the number of degrees to offset indoor temperature or percentage to offset
indoor humidity.
9
Preferences
Advanced Preferences
MENU
Next
33-00235