Step 3: Initial Setup - Honeywell TH9320WFV Installation Manual

P16

Step 3: Initial setup

Upon initial power up, or after being reset to
factory defaults, the initial thermostat options
(language, boiler cycle rate, minimum on-
time) must be set to define the heating system.
Other options can be customised later.
Follow prompts on the screen to select
appropriate options. HELP
available to provide assistance.
3.1 Touch the language you want the
thermostat to display, then touch Next.
3.2 Choose the appropriate Cycles Per Hour
for the installation (for guidance see table
in Step 4: System set up options). Use the
arrows to select the value, then touch Next.
buttons are