Detail Edit Window - YASKAWA DX100 Instructions Manual

HW0485767
DX100

2.1.2 DETAIL EDIT Window

2 How to Use the Multistep Pressure Function
2.1 Setting the Functions of the Multistep Pressure Function
While the multistep pressure function is enabled, make a selection to
enable the item for setting the number of welding to be displayed, using
the DETAIL EDIT window for the SVSPOT/SVSPOTMOV instruction. As a
result, the "WELD COND NO.." of the set number of steps will be set.
Example: In case switching from 1-step pressure to 2-step pressure
1. Open the DETAIL EDIT window of the SVSPOT instruction or the
SVSPOTMOV instruction.
2. Move the cursor to "WELD COND NO. 2."
SVSPOT Instruction
3. Press [SELECT], and the selection dialog box appears.
SVSPOT Instruction
2-2
SVSPOTMOV Instruction
SVSPOTMOV Instruction
HW0485767
12/17