Unpack Your Server - Digital Equipment Server 3100 series Installation Manual

1

Unpack your server

Unpacking Instructions
1. Tip the box on its side. Open the bottom of the box
and fold the bottom flap under the box.
2. While still in the box, set the server upright.
3. Open the top of the box and remove the country kit.
4. Close the top of the box. Using the handles on the box,
remove it from the top of the server.
5. Move the server to your desired location. Tip the
server slightly and rotate the four pedestal feet out-
ward until they lock into position.
NOTE
The country kit is in the top of the box. If desired, recycle
the packing material.
Installation Guide
WARNING
The server is heavy. Do not lift it alone.
If you need to lift the server...
1. Get close to the server. Squat down with your knees
bent and your feet apart for stable footing.
2. Lift with your legs, keeping your back straight.
3. Avoid twisting your upper body. Move your feet to turn.
4. Lower the server gently using your leg muscles to squat
while keeping your back straight.
3