Operation - Marantz PMD-602A User Manual

Setup
Items not listed under
Microphone

Operation

1. Attach your DSLR camera securely on top of the hot shoe mount.
2. Attach the Threaded Insert on PMD-602A onto your tripod mount.
3. Place the tripod on a level surface.
4. Connect microphones or line-level devices to PMD-602A and use the Input Selector to
choose Line (for line-level sources), Mic (for self-powered microphones), or PH (for
microphones that require phantom power).
5. If your microphone requires phantom power, select the appropriate voltage for your
microphone (12V or 48V) using the PH Voltage switch.
6. Adjust the Level control to set the gain for the input signal.
7. Set the Gain Selector for the channel to Hi (high) or Lo (low), depending on your source.
8. Use headphones to monitor the input signal or to hear the audio playback from your DSLR
camera.
Introduction > Box Contents
Headphones
are sold separately.
MONITOR IN
LEFT RIGHT OUT
Tripod
Camera mic input
Camera audio
output
5