VeriFone Vx510 User Manual page 4

How to Run Transactions
1)
Welcome Screen when Terminal is Idle
Ready to run a transaction;
Swipe card to start a transaction
3)
Use buttons on the
Right for Selection
Choose what Type of transaction
to run on the terminal
5)
Type in PIN on keypad, and
then Hit the Green ENTER button
7)
Hit purple button on the far left
side of terminal to accept fee
NOTE: After seeing "Transmitting..." on the screen, the screen goes blank for a few
seconds (waiting for an answer) before printing Receipt or showing the reason why
the transaction was not approved (Invalid PIN, Insufficient Funds, etc)
2)
Use buttons on the
Right for Selection
After swipping card;
Choose language preference
4)
Use buttons on the
Right for Selection
Choose what Type of account
the card being used is from
6)
Use buttons on the
Right for Selection
Choose the dollar
amount to withdraw
8)
After accepting fee, terminal will
start dialing out and will show;
Connecting... and Transmitting...