Plan Your Installation - Brivo ACS5000 Installation Manual

Hide thumbs Also See for ACS5000:

Networking manual (61 pages)

Table Of Contents

Table of Contents

ACS5000 Installation Manual

e) 1 tamper switch assembly (#ELC-TMP-A001)

5. If additional DOOR BOARDs have been ordered with the control panel, locate and check the

contents of each 2-Door Board Kit (B-ACS5000-DB). There may be up to 14 of these kits (for a

total of 15 including the MAIN BOARD) and each should contain the following parts:

a) 1 DOOR BOARD (#1181-01-0102A).

b) 5 standoffs for the DOOR BOARD (#MCH-SFF-0001)

d) 2 MOVs (Metal Oxide Varistors) (#ELC-MOV-M001)

e) 1 power cable assembly (#ELC-PWR-A001)

6. If additional INPUT OUTPUT BOARDs have been ordered with the control panel, locate and

check the contents of each INPUT OUTPUT BOARD Kit (B-ACS5000-IO).There may be up to 14

of these kits (for a total of 15 including the MAIN BOARD), and each should contain the

following parts.

a) 1 INPUT OUTPUT BOARD (#1181-01-0103A).

b) 5 standoffs for the INPUT OUTPUT BOARD (#MCH-SFF-0001)

d) 1 power cable assembly (#ELC-PWR-A001)

7. If additional expansion chassis have been ordered with the control panel, locate and check

the contents of each Expansion Chassis Kit (B-ACS5000-EXP) or Large Expansion Chassis Kit

(B-ACS5008-EXP). Each standard expansion chassis can hold up to two boards, including any

combination of door and/or Input Output boards. Each large expansion chassis can hold up to

four boards, including any combination of door and/or Input Output boards. There may be

enough Expansion Chassis kits or Large Expansion Chassis Kits to hold 1 MAIN BOARD, and

any combination of 14 door and/or Input Output boards. Each should contain the following

parts:

a) 1 metal chassis (MCH-CHA-0001)

b) 1 lock and key set (#MCH-LCK-0001)

d) 1 door label showing wiring and setup guide (Inside Door Label – Expansion (#ENG-

e) 1 tamper switch assembly (#ELC-TMP-A001), containing a tamper switch (ELC-TMP-

g) 1 AC transformer (#ELC-XFM-AMS1)

h) 1 pair of battery wires (#ELC-BAT-W001)