Chevrolet trailblazer Handbook page 268

10460390) - 2017 - crc - 6/15/16
4. Rotate the relevant bulb holder
counterclockwise.
5. Remove bulb holder. Push the
bulb into the socket slightly,
rotate counterclockwise and
remove the bulb.
6. Insert the bulb into the bulb
holder. Insert the bulb holder
into the tail light assembly,
connect the electrical
connector and fit it into place.
Install tail light assembly in
body and tighten the screws.
Close the covers and engage.
7. Switch on the ignition, operate
and check all lights.
Tail Lights of the Liftgate
1. Open the liftgate.
Vehicle Care
2. Remove the cover.
Tail light/brake light
For LED version the tail light/
brake light should be replaced
by a Chevrolet dealer.
267