Text Messaging - Chevrolet trailblazer Handbook

10460390) - 2017 - crc - 6/15/16
156 Infotainment System
Using the "Voice Keypad"
Command
g
1. Press . The system responds
"Command Please," followed
by a tone.
2. After the tone, say "Voice
Keypad." The system allows
entry of special numbers and
characters.
Using the "Voice Mail" Command
g
1. Press . The system responds
"Command Please," followed
by a tone.
2. After the tone, say "Voice Mail."
The system dials the voice mail
number of the connected
phone.
Clearing the System
Unless information is deleted out of
the vehicle Bluetooth system, it will
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see "Deleting a Paired Phone."

Text Messaging

If equipped, the infotainment system
may allow text messages to be
received and replied to. Received
messages can also be read aloud.
Before using the text messaging
feature, check to see if the phone is
compatible.
See your dealer for details.
Text Menu
Inbox : Touch to display incoming
messages. To view a message,
press on the name of the sender.
>
Press to listen to the text
message. Press BACK on the
faceplate or press the Back screen
button to go back to the
previous menu.
Settings : See "Text Settings" later
in this section.
Reply : Touch to reply using a
predefined text message. See "Text
Settings."
Call : Touch to place a call to the
sender of the text message.
Note
. There may be previous
configuration required in your
mobile to have this function
working properly.
. Due to the variety of devices and
their firmware versions, your
device may respond differently
when performing this function.
.
Any inquiries regrading your
phone functionality, refer to the
device manual.
Viewing a Text Message
While viewing a text message:
.
Touch Reply to reply using a
predefined text message.
.
Touch Call to place a call to the
sender of the text message.
Viewing Sender Information
If equipped, touch the name of the
sender to view sender information if
this information matches contact
information already stored.