Chevrolet trailblazer Handbook page 233

10460390) - 2017 - crc - 6/15/16
232 Driving and Operating
{
Warning
Poor illumination conditions will
prejudice the camera
identification of vehicles ahead.
Motorcycles may not be detected
by the camera when its is dark
enough outside.
Collision Alert
Cluster Alert
Reflected LED Alert
When your vehicle approaches
another detected vehicle too rapidly,
the red FCA display will flash and
sound several high-pitched beeps
from the front. When this Collision
Alert occurs, the brake system may
prepare for driver braking to occur
more rapidly which can cause a
brief, mild deceleration. Continue to
apply the brake pedal as needed.
Cruise control may be disengaged
when the Collision Alert occurs.
[
Press on the steering wheel to
adjust the alert sensibility. Each
press cycles the alert sensibility
through three settings: Far, Medium,
Near or Off.
When pressed, the current alert
sensibility setting displays briefly on
the instrument cluster. The alert
sensibility setting will be maintained
until it is changed.
Note
Consider traffic and weather
conditions when selecting the
following alert sensibility. The range
of selectable alert sensibility may
not be appropriate for all drivers and
driving conditions.
Tailgating Alert
The yellow Collision Alert display
will stay continuously illuminated
when following a detected vehicle
ahead much too closely.
Selecting the Alert Timing
The Collision Alert control is on the
steering wheel. Press COLLISION
ALERT to set the FCA timing to far,