Chevrolet trailblazer Handbook page 153

10460390) - 2017 - crc - 6/15/16
152 Infotainment System
.
If multiple paired cell phones are
within range of the system, the
system connects to the paired
cell phone in the order that they
were last used in the system. To
link to a different paired phone,
see "Linking to a Different
Phone" later in this section.
Pairing a Phone
1. Touch the Phone screen
button.
2. Select Phone and select Pair
Device.
3. A four-digit Personal
Identification Number (PIN)
appears on the display. The
PIN, if required, may be used
in Step 5.
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate "Chevrolet MyLink" on
the display. Follow the
instructions on the cell phone
to enter the PIN provided in
Step 3 or confirm the six-digit
code shown on the display.
After the PIN is successfully
entered or the code is
confirmed, the system
responds with "<Device name>
has been successfully paired"
when the pairing process is
complete.
6. If "Chevrolet MyLink" does not
appear, turn the phone off or
remove the phone battery and
retry.
7. If the phone prompts to accept
connection or allow phone
book download, select always
accept and allow. The phone
book may not be available if
not accepted.
8. Repeat Steps 1−7 to pair
additional phones.
Listing All Paired and Connected
Phones
1. Touch the Phone screen
button.
2. Select Phones.
Disconnecting a Connected Phone
1. Touch the Phone screen
button.
2. Select Phones.
z
3. Touch the next to the phone
to disconnect and follow the on
screen prompts.
Deleting a Paired Phone
Only disconnected phones can be
deleted.
1. Touch the Phone screen
button.
2. Select Phones.
M
3. Touch the next to the phone
to delete and follow the on
screen prompts.
Linking to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
paired to the Bluetooth system.
1. Touch the Phone screen
button.
2. Select Phones.