Chevrolet trailblazer Handbook page 231

10460390) - 2017 - crc - 6/15/16
230 Driving and Operating
See Cruise Control Light 0 100.
Switching On
Press the ON OFF push-lock button.
I
The control indicator
white.
Activation
Accelerate to the desired speed and
push the lever down to SET/−. The
current speed is stored and
maintained. The control indicator
I
changes from white to green to
indicate that the cruise control is
active. The accelerator pedal can be
released.
Vehicle speed can be increased by
pressing the accelerator pedal.
When the throttle pedal is released,
the previously stored speed is
resumed.
Increase Speed
With cruise control active, hold the
lever pushed up to RES/+ or briefly
push to RES/+ repeatedly; speed
increases continuously or in small
increments.
Alternatively accelerate to the
desired speed and store by turning
to SET/−.
Reduce Speed
illuminates
With cruise control active, hold the
lever pushed up to SET/− or briefly
turn to SET/− repeatedly; speed
decreases continuously or in small
increments.
Deactivation
Press the CANCEL push-lock
button. The control indicator
illuminates white. Cruise control is
deactivated. The stored speed is
memorized.
Automatic deactivation:
. Vehicle speed is below
approximately 40 km/h.
.
The brake pedal is pressed.
.
Selector lever in N.
.
The Traction Control System or
Electronic Stability Control is
operating.
Resume Stored Speed
Move the lever up to RES/+ at a
speed above 40 km/h. The stored
speed will be obtained. The control
I
indicator
green to indicate that the cruise
control is active. If the difference
between the current speed and the
stored speed is more than 40 km/h,
the vehicle cannot resume the
stored speed.
Switching Off
I
Press the ON OFF push-lock button.
The control indicator
The stored speed is deleted.
Switching off the ignition also
deletes the stored speed.
changes from white to
I
turns off.