JVC KW-ADV793J Service Manual page 26

It is time-out during movement to the closed position.
It is time-out during 5 degrees tilt movement.(open direction)
It is time-out during 5 degrees tilt movement.(close direction)
It is time-out during 10 degrees tilt movement.(open direction)
It is time-out during 10 degrees tilt movement.(close direction)
It is time-out during 15 degrees tilt movement.(open direction)
It is time-out during 15 degrees tilt movement.(close direction)
It is time-out during 20 degrees tilt movement.(open direction)
It is time-out during 20 degrees tilt movement.(close direction)
It is time-out during 25 degrees tilt movement.(open direction)
It is time-out during 25 degrees tilt movement.(close direction)
It is time-out during 30 degrees tilt movement.(open direction)
It is time-out during 30 degrees tilt movement.(close direction)
It is time-out during movement to the open position.
It is position error during close position stop.
It is position error during 5 degree tilt position stop.
It is position error during 10 degree tilt position stop.
It is position error during 15 degree tilt position stop.
It is position error during 20 degree tilt position stop.
It is position error during 25 degree tilt position stop.
It is position error during 30 degree tilt position stop.
It is position error during open position stop.
Detect abnormal voltage (1)
Detect abnormal voltage (2)
Detect abnormal voltage (3)
Detect abnormal voltage (4)
Note: "**" of the above error code is the number of the pulse counts at the time of the error outbreak.
4.10 Running mode
Indication Explanation
RUNNING1 MECHA Door mecha running 1
RUNNING2 MECHA Door mecha running 2
RUNNING3 MECHA Door mecha running 3
DVD+Door mecha running1 Loading → Eject → Wait for 5 seconds+Door open/close
RUNNING4 DVD
DVD+Door mecha running2 Loading → Eject → Wait for 5 seconds+Door open/close
RUNNING5 DVD
DVD+Door mecha running3 Loading → Playback → Eject → Wait for 5 seconds+Door open/close
RUNNING6 DVD
DVD+Door mecha running4 Loading → Playback → Eject → Wait for 5 seconds+Door open/close
RUNNING7 DVD
DVD+Door mecha running5 Loading → Playback → Eject → Wait for 5 seconds+Door open/close
RUNNING8 DVD
DVD+Door mecha running6 Loading → Playback → Eject → Wait for 5 seconds+Door open/close
RUNNING9 DVD
* Cancellation of running1,2 and 3 : Press the [EJECT] key
* In running 1,2 and 3 cancellation, a door does not stop at the position and moves to a panel position.
* Cancellation of running4 to 9 : Press the [POWER] key
* The number of count and an error cord are displayed in running.
Playback contents in a running mode
• CD
The first track is played for 30 seconds.
• DVD
2layer disc (Pit disc)
Title 1 (the L0 layer internal circumference) is played for 30 seconds.
Title 24 (L1layer internal circumference) is played for 30 seconds.
→
2layer disc (Recordable disc)
Title 1 (the L0 layer internal circumference) is played for 30 seconds.
→ Title 24 (L1layer internal circumference) is played for 30 seconds.
1layer disc
First chapter of title 1 is played for 30 seconds.
1-26 (No.MA473<Rev.002>)
Detail
Operation contents of 1 cycle
Panel close ↔ Panel open
Panel close → 5 degrees → 10 degrees → 15 degrees → 20 degrees
→ 25 degrees → 30 degrees → anel open
Panel → close → 5 degrees →
grees → Panel close
The last track is played for 30 seconds.
→
(The last track is played in the case of less than till the last for 30 seconds.)
The last chapter of title 1 is played for 30 seconds.
→
···· ····
→ 30 degrees → → 5 de-
→ Title 12 (L0 layer circumference) is played for 30 seconds.
→ Title 13 (L0 layer circumference) is played for 30 seconds.
Error code
0B**11
0B**20
0B**21
0B**30
0B**31
0B**40
0B**41
0B**50
0B**51
0B**60
0B**61
0B**70
0B**71
0B**80
0C0011
0C0020
0C0030
0C0040
0C0050
0C0060
0C0070
0C0080
F3**XY
F5**XY
F7**XY
F8**XY
In mecha error In disc error
- -
- -
- -
Stop -
Retry -
Stop Stop
Retry Stop
Stop Retry
Retry Retry