Table of Contents
Advertisement
2.
WIRING
2.1
Wiring Outline
Connect the power cable, transducer cables, sensor cable, network cable and ground wire to their
respective locations on the network fish finder. See the next page for how to connect the trans-
ducer cable.
TZT9/TZT14/
TZTBB
To HUB-101
Ground wire
(IV-2 sq)
Ground
Connect a ground wire (IV-2 sq, local supply) between the
ground terminal and ship's ground to prevent interference to
the sounder picture. Make the length of the wire as short as
possible. For FRP vessels, install a ground plate that mea-
sures approx. 20 cm by 30 cm on the outside of the hull bot-
tom and connect the ground wire there.
MOD-Z072-050+, 5 m
(option: 2/10 m)
MJ-A3SPF0013-035C
(3.5 m)
GROUND
Black
BATTERY
12 - 24 VDC
DFF1-UHD
External
KP
Temperature or
Speed/Temperature
Sensor*
White
Shield (green)
* For no connection,
cover connector
with supplied cap.
4
Transducer
CAUTION
Ground the equipment
to prevent mutual
interference.
Advertisement
Table of Contents
