Vga Display Identification; Dvi Display Identification; Display Port Identification; Usb Support - Philips 241B4LPCS/00 Service Manual

Mode HSYNC VSYNC
Power-On On
Standby Off
DC Power Off
3.8

VGA Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9

DVI Display identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B,
DDC/CI, and EDID V1.3.

3.10 Display port identification

3.11 USB support

Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.

3.12 DDC /CI Support and Smart Manage/Control

In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.

3.13 Pivot function

It needs to support AUTO PIVOT function with SmartControl PC application tool.

3.14 Hot-key definition

3.15 Smart Image

Rev :
0.1
2011/07/12
Date :
Video
241S4L, 241S4LC, 241S4LY <32W(max.)
On Active 241S4LA, 241B4LP, 241B4LPY <45W(max.)
EPA5.0 < 33.97W
Off Blanked
N/A
(option , refer to Quick specification table)
(option , refer to Quick specification table)
M4 241S4 / 241B4
Type :
PHILIPS
Brand :
Pwr-cons.
< 0.2W
< 0.2W
24" Wide 16:9 LCD Monitor
11 of 20
Page :
241B4LP LCD 67
Indication Rec. time
White LED --
Blinking white
LED
< 3 s
Period 1sec on
3sec off
LED Off