Page 1
User’s Guide OM-CP-PRHTEMP2000 Pressure, Humidity and Temperature Data Logger with LCD Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia Mobile: +62 816 1740 8925 Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia Fax: 021-8690 6777...
The backlight uses a significant amount of battery life. Refer to the manual to configure the auto shut-off when not in use. Submergibility The OM-CP-PRHTEMP2000 is rated IP65, which means it is dust tight and can withstand water jets. Set Password To password protect the device so that others cannot start, stop or reset the device: - In the Connected Devices panel, click the device desired.
Insert the device into a USB port. The drivers will install automatically. Installing the software Insert the Omega Software Flash Drive in an open USB port. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe. Follow the instructions provided in the Installation Wizard.
Recalibration The OM-CP-PRHTEMP2000 standard calibration is one point at 25 °C, two points at 25 %RH and 75 %RH and two points at 14.7 PSI and 30 PSI. a reminder is automatically displayed in the software when the device is...
Page 5
Quick Start Manual OM-CP-PRHTEMP2000 General Specifications Temperature Sensor Semiconductor (strain guage) Temperature Range –20 °C to +60 °C (-4 °F to +140 °F) Pressure Resolution 0.1°C (0.18°F) Calibrated Accuracy +0.5 °C/+0.9 °F (0 °C to 50 °C/32 °F to 122 °F)