Table of Contents
Advertisement
Quick Links
Xxxxx Xxxxxx
Xxxxx Xxxxxx
OM-CP-PROCESS101A
Low Level Current Data Logger
Xxxxx Xxxxxx Xxxxxxxx
Xxxxx Xxxxxx Xxxxxxxx
INSTRUCTION
INSTRUCTION
SHEET
SHEET
Shop online at omega.com
Shop online at omega.com
For latest product manuals: www.omegamanual.info
For latest product manuals: www.omegamanual.info
MQS5102/1216
M0000/0016
M0000/0016
e-mail: info@omega.com
e-mail: info@omega.com
SM
SM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Omega OM-CP-PROCESS101A
Summary of Contents for Omega OM-CP-PROCESS101A
- Page 1 Low Level Current Data Logger Xxxxx Xxxxxx Xxxxxxxx Xxxxx Xxxxxx Xxxxxxxx INSTRUCTION INSTRUCTION MQS5102/1216 M0000/0016 M0000/0016 SHEET SHEET Shop online at omega.com Shop online at omega.com e-mail: info@omega.com e-mail: info@omega.com For latest product manuals: www.omegamanual.info For latest product manuals: www.omegamanual.info...
- Page 2 Insert the device into a USB port. The drivers will install automatically. Installing the software Insert the Omega Software Flash Drive in an open USB port. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe. Follow the instructions provided in the Installation Wizard.
- Page 3 4. Screw the enclosure back together securely. Note: Be sure not to over tighten the screws or strip the threads. Recalibration The OM-CP-PROCESS101A standard calibration is at two points. The points are dependent on the range of the data logger. Range 20 mA ±...
- Page 4 WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 80°C (176°F). Specifications subject to change. See Omega’s terms and conditions at www.omega.com...
- Page 5 Fax: (203) 359-7700 e-mail: info@omega.com For Other Locations Visit omega.com/worldwide The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice. WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC.
Need help?
Do you have a question about the OM-CP-PROCESS101A and is the answer not in the manual?
Questions and answers