Related Manuals for Omega OM-CP-RTDTemp2000
Summary of Contents for Omega OM-CP-RTDTemp2000
- Page 1 MADE IN Shop online at omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info OM-CP-RTDTemp2000 Precision RTD Based Temperature Data Logger with LCD...
-
Page 2: Product Notes
100 Ohm, 2 or 4 wire RTD probes are recommended for the most accurate performance. Most 100 Ohm, 3 wire RTD probes will work, but Omega cannot guarantee the accuracy. To determine whether or not the 3-wire RTD probe will work, the resistance between the two same colored wires should be less than 1 Ohm. -
Page 3: Device Operation
Quick Start Manual Installation Guide Installing the Interface cable - OM-CP-IFC200: Insert the Software CD in the CD-ROM Drive. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe. Click on Drivers and Third Party Tools, then Install USB Interface Drivers. - Page 4 Part Number RTDTemp2000 Temperature Sensor 100Ω Platinum RTD Temperature Range -200 to +850°C Temperature Resolution 0.01°C Calibrated Accuracy +0.05°C (-200 to +260°C) +0.3°C (+260 to +850°C) Memory 174,762 Sample Rate 2 seconds up to 24 hours Required Interface Package IFC200 Typical Battery Life 1 year at 1 minute reading rate with display off, 30 days typical with continuous LCD display use...
- Page 5 European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
Need help?
Do you have a question about the OM-CP-RTDTemp2000 and is the answer not in the manual?
Questions and answers