Midi Channel - Kawai Novus NV10 Owner's Manual

System Settings
7

MIDI Channel

The MIDI Channel setting allows the transmit/receive channel to be specified. The selected channel will function as
both the transmit and receive channel (separate transmit/receive channels cannot be specified).
 Changing the MIDI Channel
Swipe left/right or tap the arrow buttons to change the MIDI
Channel setting.
* The MIDI Channel value can be adjusted within the range of 1~16.
* Any changes made to the MIDI Channel setting will remain until the
power is turned off.
 Omni mode
When the NV10 hybrid digital piano is turned on, the instrument is automatically set to 'omni mode on', allowing MIDI information to
be received on all MIDI channels (1-16). When the MIDI Channel setting is used to specify a transmit/receive channel, the instrument
will be set to 'omni mode off'.
 Multi-timbral mode and Split/Dual modes
Using Split mode with Multi-timbral mode enabled
Notes played in the lower section of the keyboard will be
transmitted on the channel that is 1 channel higher than the
specified channel. For example, if the MIDI channel is set to
3, notes played in the lower section of the keyboard will be
transmitted on channel 4.
* If the specified MIDI channel is 16, the lower section / layered part will be transmitted on channel 1.
142
Using Dual mode with Multi-timbral mode enabled
Notes played will be transmitted on two channels: the
specified channel and the channel that is 1 channel higher.
For example, if the MIDI channel is set to 3, notes played on
the keyboard will be transmitted on channels 3 and 4.

MIDI Channel