Assembly Instructions
Please read these assembly instructions thoroughly before attempting to assemble the NV10 hybrid digital piano.
Please ensure that three or more people work on assembling the NV10 hybrid digital piano, especially when
lifting the main body of the instrument onto the stand.
Included parts
Before attempting to assemble the NV10 hybrid digital piano, ensure that all parts below are included.
A Phillips-head screwdriver (not included) will also be required in order to assemble the instrument.
Please do not remove the main unit from the box before step 3.
A
Main body
D
Pedal base
Screw set
Screw (6 x 35 mm) x 12
Screw (4 x 30 mm) x 8
Screw (4 x 20 mm) x 5
B
Leg 1 (left)
E
Stand back board
Headphone hook
C
Leg 2 (right)
Power cable
Headphone hook set
Mounting screws (4 x 14 mm) x 2
149