Kawai Novus NV10 Owner's Manual page 13

a POWER button
This button is used to turn the instrument on/off. Be sure to
turn off the instrument after playing.
* The NV10 hybrid digital piano features a power saving mode that
can turn off the instrument automatically after a specified period
of inactivity. For more information, please refer to the 'Auto
Power Off' setting on page 147.
b MASTER VOLUME knob
This knob controls the master volume level of the instrument's
built-in speakers or headphones, if connected.
* The MASTER VOLUME knob will also affect the volume level of the
LINE OUT connectors.
c PHONES jacks
These jacks are used to connect stereo headphones to the NV10
hybrid digital piano. 1/4" and 1/8" connectors are provided for
convenience, and both can be used simultaneously, allowing
two pairs of headphones to be connected at the same time.
d USB to DEVICE connector
This port is used to connect a FAT or FAT32 formatted USB
memory device to the instrument in order to load/save
recorded song data, and MP3/WAV/SMF files etc.
e TOUCHSCREEN display
The touchscreen display provides useful information such as
the currently selected mode, sound name, settings values, and
the status of various functions. The touchscreen is also used to
interact with the instrument by gently tapping on buttons and
icons that appear, or by swiping left and right, or up and down.
* A protective plastic film is attached to the display during
production. Please remove this film before attempting to play the
instrument.
* The display can be set to turn off automatically after a period of
inactivity. For more information, please refer to the 'Auto Display
Off' setting on page 146.
f LINE IN STEREO jack
This jack is used to connect the 1/8" stereo output from
smart phones, tablets, computers, or other electronic audio
equipment to the NV10 hybrid digital piano's amplifier and
speakers.
The input level can be adjusted by using the LEVEL knob.
g LINE OUT jacks
These jacks are used to connect the stereo output (Left/Right
1/4" phone plug) of the NV10 hybrid digital piano to external
amplifiers, mixers, recording devices, and similar equipment.
h USB to HOST port
This port is used to connect the NV10 hybrid digital piano to a
computer using a USB 'B to A' type cable in order to send and
receive MIDI data.
i MIDI IN / OUT jacks
These jacks are used to connect the NV10 hybrid digital piano
to external MIDI devices such as other musical instruments or a
computer in order to send and receive MIDI data.
* For more information about the instrument's connectors and
jacks, please refer to 'Connecting to Other Devices' on page 154.
13