Midi Channel - Kawai CN301 Manual

▋ MIDI settings
Function name

MIDI Channel

Transmit Program Change
Number
Local Control
Transmit Program Change
Number ON/OFF
Multi-timbral mode
Channel Mute
▋ Entering MIDI settings
1. On the Settings Menu screen, press the [UP]/[DOWN] button
to select "MIDI Settings".
2. Press the [2] button to enter the MIDI Settings screen.
3. Press the [UP]/[DOWN] button to select a setting.
4. Press the [LEFT]/[RIGHT] button to set the value or type.
• Pressing the [LEFT]/[RIGHT] buttons simultaneously will re-
store the default setting.
MIDI Channel
▋ Setting MIDI channel
With "MIDI Channel" selected, press the [LEFT]/[RIGHT] button to
select the MIDI channel.
• The MIDI Channel setting is eff ective until the power is turned off .
• The preferred MIDI Channel setting can be stored to the Startup Setting memory for automatic selection when the
instrument is turned on. Please refer to Owner's Manual page 50 for more information.
Explanation
This setting allows the transmit/receive channel to be specifi ed. The selected
channel will function as both the transmit and receive channel. Separate trans-
mit/receive channels cannot be specifi ed.
This function is used to transmit a program change number (ranging from 1 to
128) in order to change the sound of an external MIDI device.
This setting determines whether the digital piano will play an internal sound
when the keys are pressed. This setting is useful when using the digital piano to
control an external MIDI device.
When Local Control is set to "On", the digital piano will play an internal sound and
transmit information to an external MIDI device.
When Local Control is set to "Off ", the digital piano will transmit information to an
external MIDI device only.
This setting determines whether or not the digital piano will transmit program
change information when sounds are changed.
This setting determines whether or not the digital piano is able to receive MIDI
information on more than one MIDI channel simultaneously. This allows the in-
strument to play back multitrack, multi-timbral performance data sent from an
external MIDI device.
This setting is enabled only when Multi-timbral Mode is ON. This setting deter-
mines whether to receive information for each MIDI channel.
EFFECTS
�
EFFECTS
2
Default setting
1ch
1
On
On
Off
Play All
�
REVERB
�
�
�
�
REVERB
�