Kawai Novus NV10 Owner's Manual page 151

3. Mounting the main body onto the stand
Ensure that three or more people undertake the
following step of the assembly process.
Remove the main body from the box, lifting the unit
sufficiently onto the back of the stand.
Adjust the positioning to ensure that the guides on the main
body fit inside the side plates of the pedal base.
Gently slide the main body forward so that when viewed
from directly above, the front of the main body is aligned
with the centre of the plastic parts of the stand's legs.
At this point, the main body will be tilted back. Proceed to
the next step promptly.
Lift the main body and gently position the unit so that its
screw holes (on the underside) correctly align with the
metal fittings of the stand's legs.
Guides
Side plates
A
B
D
C
A
B
A
Front of main body
Plastic part of leg
C
C
When lifting and positioning the main body, do
not hold the gray shaded areas.
A
Do not hold the main body from the front of
the unit, in order to prevent catching/trapping
hands or fingers on the stand's legs.
A
C D
When lifting the main body onto the stand, be
careful not to catch/trap hands or fingers.
20cm
20cm
151