Kawai Novus NV10 Owner's Manual page 152

Assembly Instructions
4. Fastening the main body to the stand
Loosely attach the main body to the stand using 2 screws
at the front of the instrument (through the legs), and 10
screws towards the back of the instrument.
Adjust the positioning of the main body to ensure that
when viewed from the front, the body and legs are correctly
aligned.
When the main body and legs are correctly aligned, tighten
all 12 screws firmly.
Ensure that the assembled instrument is absolutely stable
and does not rattle when pushed. If the stand is not
completely steady, loosen the screws attached in steps
1- ~1- , gently reposition the parts, and then retighten
the screws.
A
B
A
B
A
B
Tighten all screws securely to ensure that the
main body is firmly attached to the stand.
152
5. Connecting the cords
A
B
C
C
Carefully connect the two cords to their respective plugs.
Ensure that the cords are connected securely, and that there
are no gaps between the plugs.
Cord 1
Cord 2
Ensure that the two cords are connected
securely to ensure that the instrument's
keyboard and pedals work correctly.