Kawai Novus NV10 Owner's Manual page 153

6. Attaching the stand back board
Attach the stand back board (E) to the pedal base using 5 screws
.
Ensure that cords 1 and 2 do not get trapped between the stand
back board and the pedal base's metal fittings.
E
D
7. Connect the power cable to the instrument
Connect the included power cable to the AC IN terminal located
on the back side of the pedal base, in the bottom left corner.
8. Attaching the headphone hook (optional)
A headphone hook is included with the NV10 hybrid digital piano
and can be used to hang headphones when not in use.
If desired, attach the headphone hook to the underside of the
main body using the two tapping screws provided.
9. Adjusting the pedal support bolt
Turn the pedal support bolt anti-clockwise, extending the bolt
until it makes contact with the floor and supports the pedals
firmly.
D
When moving the instrument, always retract
(raise) the pedal support bolt, then readjust
when the instrument is in its new position.
Also, ensure that the instrument is moved by
lifting and not dragged or pushed.
153