Function Of Indicators - A.O. Smith X8 User Manual

Function of indicators

Power Button
This button is used to switch ON/OFF the Water Purifier.
• When the Power button is blinking, check feed water supply to the purifier.
Tank full indicator
This indicates that the Water Purifier tank is full.
• When there is an overflow, the indicator starts to blink with continuous beep till it is
fixed.
Note: Call A. O. Smith Customer Care Centre if you notice continuous blinking of Tank full indicator.
Auto-flush indicator
This indicates flushing is in progress. Every time the water purification process is
activated, the auto flushing mechanism cleans the RO membrane. It enhances the life of
RO membrane.
Note: Call A. O. Smith Customer Care Centre if you notice continuous blinking of Auto-flush indicator.
RO change indicator
This indicates that the RO membrane needs to be replaced.
• RO change indicator starts blinking (buzzer 10 times) indicating that the RO
membrane life is reaching its end time.
• When RO membrane life reaches its end, RO change indicator keeps on blinking and
the unit stops functioning.
Note: Call A. O. Smith Customer Care Centre to replace the
RO membrane.
07