Technical Specifications
Model
Product Dimensions (H x D x W)
Net weight
Gross weight
Flow rate*
Storage tank capacity
Purification technology
8 Stage Purifying Technology
Membrane type
Material of construction for
plastic parts
Pump type
Input voltage range
Power rating (Max.)
Pressure Rating***
% Recovery**
TDS reduction**
Input water temperature
* Flow rate depends on variable factors such as feed water pressure, feed water characteristics
and condition of the RO membrane and filters.
** Recovery and TDS reduction percentages also depend on variable factors such as life and
condition of the RO membrane and filters, feed water pressure and feed water characteristics.
*** If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed
line. If the pressure is lower than 7 psi, a booster pump needs to be installed. Ensure you buy
them from A. O. Smith Company Authorised Service Technician.
Patent Applied.
As tested with input water TDS of 750 ppm, Water temperature of 27°C and feed pressure of
20 psi.
A. O. Smith
RO
490 mm x 329 mm x 315 mm
9.5 kgs (approx.)
13.9 kgs (approx.)
Up to 15 litres per hour
9 litres (approx.)
RO (Reverse Osmosis) + Silver Charged
Membrane Technology
Pre-filter + Sediment filter + Carbon Block +
ART™ + Side Stream RO membrane +
MIN-TECH + ZX Double Protection Dual Filter
(Silver Activated Post Carbon block + SCMT).
Thin film composite RO membrane
Food safe, non-toxic, engineering grade
plastics
Diaphragm pump, 24VDC, 0.45 Amps at 80 psi
150 – 300 VAC, 50 Hz
48 Watts
7 psi to 30 psi
Up to > 55%
≥95% (approx.)
5°C to 45°C
18