A.O. Smith X8 User Manual page 20

Buzzer beeps and
tank full LED blinks
continuously.
Buzzer beeps for 8
times and power LED
blinks continuously.
Buzzer beeps and
auto-flush LED blinks
continuously.
Buzzer beeps 10
times, RO change
LED blinks and unit
is functioning.
Buzzer beeps 10
times, RO change
LED blinks and unit
is not functioning.
Buzzer beeps 10
times, SCPA change
LED blinks and unit
is functioning.
Buzzer beeps 10
times, SCPA change
LED blinks and unit
is not functioning.
Buzzer beeps
continuously and all
LED (Power, Tank full
and Auto flush) blinks.
Overflow error.
Low pressure alarm is
triggered indicating that
the system input water
pressure is not in the
required range.
Level sensor error.
RO membrane life is
about to end.
RO membrane life ends.
Pre and Post RO filters
life is about to end.
Pre and Post RO filters
life ends.
Battery error.
17
Switch OFF the Water
Purifier and call Customer
Care Centre.
Check feed water supply to
the purifier. If problem still
persists, switch OFF the
Water Purifier and call
Customer Care Centre.
Switch OFF the Water
Purifier and call Customer
Care Centre.
Call Customer Care Centre
for RO membrane
replacement.
Switch OFF the Water
Purifier and call Customer
Care Centre for
RO membrane
replacement.
Call Customer Care Centre
for Pre and Post RO filters
replacement.
Switch OFF the Water
Purifier and call Customer
Care Centre for Pre and
Post RO filters replacement.
Switch OFF the Water
Purifier and call Customer
Care Centre.