Epson L365 Service Manual page 71

L365/L366,L360/L362,L310/L312,L220/L222,L130/L132 Series
Combination gear 14.4,10.8
Scanner Carriage
Cross-section
Pinion Gear
Scanner Motor
Figure 4-18. Lubrication of Scanner Motor, Combination Gear 14.4,10.8 and Combination Gear 13.8,9.66
Maintenance
<Part supply as ASP>
Combination gear 13.8,9.66 Supplied as the Scanner Unit
<Lubrication status when
supplied as ASP>
Lubricated
<Lubrication Point>
1. Gear sections (x2) on the
Pinion Gear of the
Scanner Motor
2. Shaft hole of the
Cross-section
Combination Gear 14.4.10.8
3. Shaft hole of the
Combination Gear 13.8.9.66
<Type>
G-45
<Application Amount>
1. 0.01 g x 2 points
2.3. 0.01 g
<Remarks>
1. Apply with injector.
2.3. After applying with
injector, spread it over
the entire inner surface
the shaft hole shown in
the figure.
Be careful not to let
Application Point
grease flow over.
Lubrication Points and Instructions
Revision A
71
Confidential