Epson L365 Service Manual page 46

L365/L366,L360/L362,L310/L312,L220/L222,L130/L132 Series
PF Grounding Spring
Left
PF Grounding
Spring leg A
Spring
Cutout
Spring leg B
Spring leg B
Main Frame
PF Grounding
Spring
Frame Base
Insert spring leg
Assy
A into groove.
When installing the PF Grounding Spring, follow the procedure below.
1. From the left side of the printer, insert the spring leg A of the
PF Grounding Spring into the hole of the Frame Base.
2. Insert the spring leg B of the PF Grounding Spring into the
groove of the Frame Base.
3. Attach the spring leg B of the PF Grounding Spring to the
cutout of the Main Frame to install the PF Grounding Spring.
Cover / Guide Tube Tank
Right side
Guide Tube Tank
3
2
1
C.B.P-TITE SCREW 3x6 F/ZN-3C (4 ± 1
Follow the procedure below when removing the Cover Tube Tank and Guide Tube Tank.
1. Removing the screw (x1) of the Cover Tube Tank from Ink Supply Tank Assy.
2. Removing the screw (x2) of the Cover Tube Tank .
3. Removing the hooks (x2) of the Cover Tube Tank and separating Cover Tube Tank and Guide Tube Tank.
Disassembly/Reassembly
Top Cover
Top Cover Label
Hole
Top Cover
When attaching the Top Cover Label, align it with the markings on
the Top Cover as shown in the figure above.
Ink Supply
Tank Assy
Back side
Cover Tube
Tank
Cover Tube
Tank
Detailed Disassembly/Reassembly Procedure for each Part/Unit
Top Cover
Color position
Color indication on Ink Tank is deleted. Color position is
specified on Top Cover.
Guide Tube Tank
Cover Tube
Tank
Hook
Follow the procedure below when installing the Cover Tube Tank and Guide Tube Tank.
1. Joint the Cover Tube Tank to Guide Tube Tank and tighten the screw (x1) of the Cover Tube Tank.
2. Insert the dowels (x2) of the Cover Tube Tank to the positioning Hole (x2) of the Ink Supply Tank Assy.
3. Tighten the screw (x2) of the Cover Tube Tank.
Ink Supply Tank Assy
No color position
Film
Be careful not to damage or peel off the film of the Ink Supply
Tank.
Be careful about how to place the Ink Supply Tank Assy in
order to prevent printing failure from occurring. (See
"2.1.5Checks and Precautions before Disassembling (p25)"
Cover / Guide Tube Tank
Ink Supply
2
Tank Tube
1
Guide Tube
Tank
Positioning Hole Dowel
C.B.P-TITE SCREW 3x6 F/ZN-3C (4 ± 1
Revision A
Ink Supply Tank
.)
46
Confidential