Password Protection - Mitsubishi Electric MelcoREMOTE Installation And Operation Manual

1) Modem initialisation
2) GSM signal strength check
3) Connection to Internet
4) Connection to server
5) Synchronisation with server
While the MelcoRETAIL synchronises with the server the progress is displayed, as shown in the following image.
Synchronisation progress indication
Pressing I/Os enters the I/O Status screen, pressing Sync forces the MelcoRETAIL to synchronise with the server and
Config enters the Configuration screen. The Status screen can always be returned to from either the I/O Status or
Configuration screens by pressing Back.
12.5.

Password protection

The I/O Status and Configuration screens can be protected by means of an optional 4-digit Commissioning Password.
When shipped from the factory MelcoREMOTE does not have this password enabled and all screens are freely
accessible. After commissioning this password can be enabled and changed to prevent unauthorised access to
MelcoREMOTE configuration and output overrides.
If you unexpectedly encounter a password protected screen please contact your supplier.
Page 30 of 52