Motorola AP-6511 Installation Manual page 19

16 AP-6511 Access Point Installation Guide
3. Enter the default username admin in the Username field.
4. Enter the default password motorola in the Password field.
5. Select the Login button to load the management interface.
If this is the first time the management interface has been accessed, you are prompted to
change the default password, and a dialogue displays to start the Initial Setup Wizard.
6. Select the Start Wizard button to run the initial setup wizard.
The setup wizard displays the first time the AP-6511 user interface is accessed in order to
define the AP-6511's configuration.
Once these settings have been defined, and the AP-6511 has successfully been deployed or
adopted by a Controller AP, the Initial Setup Wizard no longer displays in subsequent logins.
NOTE When navigating the Initial Setup Wizard, the left-hand side of the
Wizard can either display a topology Diagram or an Event Log of the
tasks completed or failed during the AP-6511 configuration. Motorola
recommends periodically reviewing the topology and log to assess
whether the tasks completed thus far have satisfied their intended
AP-6511 deployment requirements. Once the tasks within the Initial
Setup Wizard are completed, the user can navigate within the AP-6511
user interface to complete a broader range of configuration activities. For
advanced configuration information beyond the scope of this AP-6511
Installation Guide, refer to the Motorola Wireless Services Controller
System Reference Guide, available at
http://support.symbol.com/support/product/manuals.do.