Advertisement
Step 32.
Verify that the Seat Slider travels all the way back
until the indicator points at position 7 (or 9 de-
pending on your model).
Step 34.
Adjust the Seat Height.
Loosen and pull out the Pop-Pin, then lift the Seat Post
up to higher levels while holding the Pop Pin out.
Check for Pop-Pin engagement with the mating holes
on the Seat Post each time you move up the Seat Post
to a higher position.
Tighten pop pin.
12
FUNCTIONAL TEST
Step 33.
Verify that the Seat Slider travels all the way for-
ward until the indicator points at position 0
Secure the Seat Slider Post by turning the Seat
Slider Lock Knob clockwise.
Note: At Seat Slider position "0" the guide rail
rear end caps should be aligned.
.
620-8006 Rev A
Advertisement
