Vlans - Meru Networks AP110 Deployment Manual

Hide thumbs Also See for AP110:

Table of Contents

The configuration takes effect on those APs that are part of a port profile. Multiple port profiles

can be configured on the controller with different configurations for different APs.

Figure 7: AP110 and AP1014i Deployment with Wired Device Support

VLANs

VLANs are supported in tunnel mode for wired and wireless profiles. The traffic from the client

is always untagged, and the controller maps the traffic to the correct VLAN. Multicast traffic

can be optionally filtered.

VLANs are not supported in bridge profiles (wired and wireless).

The multiple interfaces of an AP1014i are all members of the same VLAN.

Table 3

lists the VLAN tagging support for Meru access points. For Meru APs with additional

Ethernet ports, VLAN tags are not added to outgoing packets destined for wired clients on

those Ethernet ports.

For use by Meru Networks authorized partners and customers.

Table of Contents

Ap1014i