Table of Contents
Advertisement
Figure 3: Default Port Table Page
To add AP interfaces to the default port profile:
1.
Select Configuration > Wired > Port.
2.
Select the check box for the default profile, and click Settings.
3.
Click the Port AP Table tab.
The Port-AP Member Table page appears, as shown in
are multiple interfaces listed because the AP is an AP1014i.
4.
Click Add.
5.
Select the check boxes of the AP interfaces.
6.
Click OK to add the AP interfaces to the port profile.
14
For use by Meru Networks authorized partners and customers.
Figure
4. In this example, there
Advertisement
Table of Contents
Need help?
Do you have a question about the AP110 and is the answer not in the manual?
Questions and answers