Figure 4: Port-AP Member Table Page (AP1014i)
Differences Between AP110 and AP1014i Wired Interfaces
There are two ports labeled as F1 and F2 on the AP110. F1 is the LAN port and is yellow. F2
is the WAN port and is green. On the AP1014i, the LAN ports are yellow, and the WAN port is
green. The rear view of the AP110 is shown in
Figure
5. The rear view of the AP1014i is
shown in
Figure
6.
Figure 5: AP110 Rear View
Figure 6: AP1014i Rear View
For use by Meru Networks authorized partners and customers.
15
Need help?
Do you have a question about the AP110 and is the answer not in the manual?
Questions and answers