Settings; Time Setting - Polar Electro FS1 User Manual

4. SETTINGS

4.1 TIME SETTING

1. In the Time of Day display, press the front button until
TIME is displayed. Wait for three seconds to enter the
time settings.
2. 12h or 24h is fl ashing.
Wait until OK? is displayed.
To approve your choice, press
the front button.
If you do not approve your choice
within three seconds, the wrist
unit will return to the time mode
selection.
14
Press the front button to
select 12h or 24h.
3. If you selected 12h time mode, AM or PM is fl ashing.
Press the front button to select
AM or PM.
Wait until OK? is displayed.
To approve you choice, press the
front button.
4. Hours fl ash on the display.
When
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode after two seconds.
is on the display,
after two seconds.