Blue Indicator Lights - Dodge charger 2018 User Manual

— LaneSense Indicator Light — If
Equipped
When the LaneSense system is ON, but not
armed, the LaneSense indicator is solid white.
This occurs when only left, right, or neither lane
line has been detected. If a single lane line is
detected, the system is ready to provide only
visual warnings if an unintentional lane depar-
ture occurs on the detected lane line. Refer to
"LaneSense — If Equipped" in "Starting And
Operating" for further information.
— Sport Mode Indicator Light
This light will turn on when Sport Mode is
active.
Refer to the "Drive Mode Supplement" for fur-
ther information.
— Track Mode Indicator Light
This light will turn on when Track Mode is
active.
Refer to the "Drive Mode Supplement" for fur-
ther information.
64
— Valet Mode SRT Indicator Light
This light will turn on when Valet Mode is active.
Refer to the "Drive Mode Supplement" for fur-
ther information.
— Passive Speed Limiter Engaged
The indication light up white along with a noti-
fication text message (speed warning set to xx
followed by unit). When the set speed is just
exceeded, a single chime will sound along with
pop up message of speed warning exceeded.
When the set speed is exceeded by 2 mph
(3 km/h) or more, the indication will light up
yellow and flash along with a continuous chime
(up to 10 seconds or until the speed is no longer
exceeded).
NOTE:
The number "31" is only an example of a speed
that can be select.

Blue Indicator Lights

— High Beam Indicator Light
This indicator shows that the high beam head-
lights are on. With the low beams activated,
push the multifunction lever forward (toward
the front of the vehicle) to turn on the high
beams. Pull the multifunction lever rearward
(toward the rear of the vehicle) to turn off the
high beams. If the high beams are off, pull the
lever toward you for a temporary high beam on,
"flash to pass" scenario.