Chassis; Fluids And Lubricants - Srt; Engine - Dodge charger 2018 User Manual

Chassis

Component
Automatic Transmission — 8-Speed Transmission Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the
Brake Master Cylinder
Front Axle – AWD (If Equipped)
Rear Axle – 3.6/5.7 Engine
Rear Axle – 6.4L Engine
Transfer Case – AWD (If Equipped)
FLUIDS AND LUBRICANTS — SRT

Engine

Component
Engine/Intercooler Coolant
Engine Oil
Engine Oil Filter
Spark Plugs
Fuel Selection
Fluid, Lubricant, Or Genuine Part
correct fluid may affect the function or performance of your transmission.
We recommend you use Mopar DOT 3 and SAE J1703. If DOT 3 brake fluid is not available, then
DOT 4 is acceptable.
We recommend you use Mopar Synthetic Gear Lubricant SAE 75W90 (API GL-5).
We recommend you use Mopar OD Synthetic Gear Lubricant SAE 75W85 (API GL-5).
We recommend you use Mopar LSD Synthetic Gear Lubricant SAE 75W85 (API GL-5).
We recommend you use Mopar Transfer Case Lubricant for BorgWarner 44–40.
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant con-
forming to MS.90032.
For best performance and maximum protection under all types of operating conditions, the manufac-
turer only recommends full synthetic engine oils.
The manufacturer recommends the use of Pennzoil Ultra Platinum 0W-40 or equivalent Mopar engine
oil meeting the requirements of FCA Material Standard MS-12633 for use in all operating tempera-
tures.
Mopar Engine Oil Filter or equivalent.
We recommend you use Mopar Spark Plugs.
91 Octane or higher, 0-15% Ethanol.
197