Dodge charger 2018 User Manual page 230

USB Port
• Connect your compatible device using a USB
cable into the USB Port. USB Memory sticks
with audio files can also be used. Audio from
the device can be played on the vehicles
sound system while providing metadata (art-
ist, track title, album, etc.) information on the
radio display.
• When connected, the compatible USB device
can be controlled using the radio or Steering
Wheel Audio Controls to play, skip to the next
or previous track, browse, and list the con-
tents.
• The battery charges when plugged into the
USB port (if supported by the specific device).
• To route the USB cable out of the center
console, use the access cut out.
228
NOTE:
When connecting your device for the first time,
the system may take several minutes to read
your music, depending on the number of files.
For example, the system will take approximately
five minutes for every 1,000 songs loaded on
the device. Also during the reading process, the
Shuffle and Browse functions will be disabled.
This process is needed to ensure the full use of
your features and only happens the first time it
is connected. After the first time, the reading
process of your device will take considerably
less time unless changes are made or new songs
are added to the playlist.
Bluetooth Streaming Audio
• If equipped with Uconnect Voice Command,
your Bluetooth-equipped device may also be
able to stream music to your vehicle's sound
system. Your connected device must be
Bluetooth-compatible and paired with your
system (see Uconnect Phone for pairing in-
structions). You can access the music from
your connected Bluetooth device by pressing
the Bluetooth button on the touchscreen
while in Media mode.