Aux/Usb/Mp3 Control - Dodge charger 2018 User Manual

4. Select your preferred Navigation App to
route a path to your vehicle.
Send & Go
The Send & Go feature of the Uconnect Mobile
App allows you to search for a destination on
your mobile device and then send the route to
your vehicle's Uconnect Navigation system.
To send a navigation route to your vehicle:
1. Press the "Location" tab on the Uconnect
Mobile App bottom bar.
2. Either type in the destination you would like
to navigate to, or search through one of the
categories provided.
3. Select the destination you want to route to
from the list that appears.
4. Press the "Send To Vehicle" button, and
then confirm the destination by pressing
"Yes," to send the navigation route to the
Uconnect Navigation in your vehicle.
5. Finally, confirm the route inside your vehicle
by pressing the "Go Now" option on the
pop-up that appears on the touchscreen,
when the vehicle is started.

AUX/USB/MP3 CONTROL

Uconnect Media Hub
1 — USB Port One
2 — Audio/AUX Jack
3 — USB Port Two
There are many ways to play music from
MP3 players or USB devices through your vehi-
cle's sound system. Press your Media button on
the touchscreen to begin.
Audio Jack (AUX)
• The AUX allows a device to be plugged into
the radio and utilize the vehicle's sound sys-
tem, using a 3.5 mm audio cable, to amplify
the source and play through the vehicle speak-
ers.
• Pressing the "AUX" button on the touch-
screen will change the mode to auxiliary de-
vice if the audio jack is connected, allowing
the music from your device to be heard
through the vehicle's speakers. To activate the
AUX, plug in the audio jack.
• The functions of the device are controlled
using the device buttons. The volume may be
controlled using the radio or device.
• To route the audio cable out of the center
console, use the access cut out in the front of
the console.
227