Number Plate Light; Helmet Compartment Lighting Bulb - PIAGGIO X10 350ie Executive Owner's Manual

Number plate light (03_44, 03_45)

To replace the license plate light it is necessary to remove the plate holder, unscrew
the three screws indicated and recovering the washers and at the rear and nuts.
With the license plate fitted, remove only the rear nuts but pay attention to the correct
position of the screws: once removed, place the plate in a horizontal position and
keeping the numbering visible.
03_44
Unscrew and remove the two screws and remove the license plate holder.
CAUTION
DO NOT PULL THE ELECTRICAL CABLES WHEN TAKING OUT THE BULB
HOLDER.
03_45

Helmet compartment lighting bulb (03_46)

Open the helmet compartment, take out the snap-on transparent glass and replace
the bulb.
03_46
91