Number Plate Light - PIAGGIO Liberty 50IE 2018 Instructions Manual

STOP LIGHT BULB
Stop light bulb
Slightly press the stop light bulb, turn it anticlockwise and remove it from the bulb
holder. To refit, proceed in reverse order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE AN ABNORMALITY AND IS RELATED TO HUMIDITY AND/
OR LOW TEMPERATURES.
IT WILL DISAPPEAR QUICKLY WHEN THE HEADLIGHT IS TURNED ON.
IF HOWEVER THERE ARE DROPS OF WATER, IT MIGHT MEAN SEEPAGE AND
03_50
YOU SHOULD SEE AN AUTHORIZED SERVICE CENTRE.
Type: Spherical
Power: 12V - 10W
Quantity: 1

Number plate light (03_51, 03_52)

To access the licence plate light, proceed as follows:
From the inside of the licence plate holder extract the bulb holder from the licence
plate light.
CAUTION
DO NOT PULL THE ELECTRICAL CABLES WHEN TAKING OUT THE BULB
HOLDER.
03_51
64