Maintaining Your Machine; Cleaning The Inside The Scanner Cover - Ricoh 5100WD Operating And Troubleshooting Manual

Maintaining Your Machine

If the exposure glass, or white strip is dirty, copy clarity may be reduced. Clean these parts if they are dirty.
• Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get
inside the machine or melt plastic parts, a failure might occur.
• Do not clean parts other than those explicitly specified in this manual. Other parts should only be
cleaned by your service representative.
How to maintain
Cleaning the machine: Wipe the machine with a soft, dry cloth. If this does not remove the dirt, wipe
the machine with a damp and tightly wrung cloth. If a damp cloth still does not remove the dirt, try
using a mild detergent. Wipe the machine with a dry cloth to remove the moisture, after using a damp
cloth.

Cleaning the Inside the Scanner Cover

If you open the scanner cover, you can access the exposure glass and original feed mechanism.
1. While holding both ends of the scanner cover, press the release levers, and then open the
cover by pulling it up.
BLG004S
Maintaining Your Machine
7
99