Ricoh 5100WD Operating And Troubleshooting Manual page 72

4. Troubleshooting When Using the Scanner Function
Message
"Exceeded max. number of
standby files. Try again after
the current file is sent."
"Exceeded max. number of
stored files. Cannot send the
scanned data as capturing
files is unavailable."
"Exceeded max. page
4
capacity per file. Press [Send]
to send the scanned data, or
press [Cancel] to delete."
"Exceeded maximum number
of file to store. Delete all
unnecessary files."
"Exceeded time limit for LDAP
server search. Check the
server status."
"Invalid certificates or no S/
MIME certificates were
found."
"LDAP server authentication
has failed. Check the
settings."
70
Cause
The maximum number of
standby files was exceeded.
Too many files are waiting to
be delivered.
The number of scanned
pages exceeded maximum
page capacity.
Too many files are waiting to
be delivered.
A network error has occurred
and connection has failed.
The destination's S/MIME
certificates are invalid or
cannot be found.
The user name and password
differ from those set for LDAP
Authentication.
Solution
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery functions. Wait until
files have been sent.
Please try again after they have been
delivered.
Select whether to send the data so far.
Please try again after they have been
delivered.
• Try the operation once more. If the
message is still shown, the network
may be crowded.
• In [System Settings], under
[Administrator Tools], check the
settings of LDAP server. For details,
see "Programming the LDAP
server", General Settings Guide.
Contact the administrator.
In [System Settings], under
[Administrator Tools], check the settings
of LDAP server. For details, see
"Programming the LDAP server",
General Settings Guide.