Installing Mattercontrol - SeeMeCNC ERIS DELTA Manual

MatterControl is the control program that you'll be using with your new Eris® printer.
MatterControl is known as a combination host and "slicer". It's "host" feature allow you to
control the Eris® directly – moving the axes, heating the hot end, etc. The "slicer" feature is
what converts a 3D model into a form suitable for printing. We'll cover that shortly.
You can download MatterControl by going to the SeeMeCNC website –
http://seemecnc.com/pages/downloads. Scroll down to the "Software" heading and you'll see
the links for MatterControl. Download the version for your platform and install it.
Note that the MacOS version is functionally identical to the Windows version, so I'll only
be showing examples from Windows – the same procedures should apply to both versions.
You'll also want to download the Eris® Default Files from the Eris® page on the
SeeMeCNC website:
3d-printer. Look for the link marked "DOWNLOAD ERIS SETTINGS HERE". Unpack the files
so they're ready to use when you need them.
Start MatterControl. Below you'll see what the basic MatterControl interface looks like.
2 – Installing MatterControl
https://www.seemecnc.com/collections/3d-printers/products/eris-desktop-
5